This shorter-length spacer for Silent Captured Spring allows usage of the SCS with A5-length buffer tubes and buffers such as the VLTOR. This spacer is standardized to function without modification for the VLTOR/Bravo Company tubes with an internal length of approx. 7.75 inches. Because other manufacturers hold slightly different A5 tube lengths, some easy trimming of this spacer may be necessary. In some cases, the A5 buffer tube may need to be backed out one rotation for proper fitment. Specifications for JP Enterprises SCS Alternative A5 Spacer: Manufacturer: JP Enterprises Color: White Features of JP Enterprises SCS Alternative A5 Spacer Allows JP Silent Captured Spring systems to be installed in an A5-length buffer tube. Package Contents: JP Enterprises SCS Alternative A5 Spacer
6 reviews for JP Enterprises SCS Alternative A5 Spacer
Only logged in customers who have purchased this product may leave a review.
Related products
JP Enterprises
JP Enterprises
JP Enterprises
JP Enterprises
JP Enterprises
JP Enterprises
JP Enterprises
JP Enterprises
RTS –
I have a darkest hour tube with a jp silent buffer system a d this spacer, with the addition of a quarter worked great. I guess its pricey for what it is, since i could have just cut a standard spacer down but i thiught i would give this a try. Great for convenience, but not completely necessary.
T.k.c. –
Bought this for a .450 bushmaster project was workin on and works great. Decided on using standard ar10 buffer and spring in an a1tube,as with the muzzlebrake I used the recoil impulse was right around .308 level so used this spacer behind the spring to prevent overtravel from the different cartridge lengths
t1tan –
It fits, it works, not much to this piece, just a spacer. Using VLTOR A5 tubes I still need an additional spacer along with this to get the right tension to eliminate the gap between the BCG and the SCS, if this was .0625-.125" longer it would be ideal. If I had access to a lathe I'd turn down the rifle length one included with the SCS into 3 of these.
tj –
I got a JP Silent Capture Spring for my Savage MRS Long Range. The factory buffer spring worked ok, but made a lot of noise and I was looking for a better solution. The JP SCS seemed like it might be a good answer. I thought I got the right size, but was not sure. Nowhere did I find info about installing the Silent Capture Spring on my MRS.When I installed the SCS, it was loose and did not seem to fit properly.. I was confused. I found out that the Savage MRS had an A5 length buffer tube and I needed this spacer… Got it .. drops in easily. Now the Silent Capture Spring fits my MRS perfectly!
Stephendh2000 –
Perfect fit to run the silent capture spring in the A5 buffer tube.
Gr8N8 –
This is easy to install and customize to the needed fit.