Strike Industries AR-15/AR-10 Enhanced Pistol Grip

6 reviews for Strike Industries AR-15/AR-10 Enhanced Pistol Grip

1. 

   Mr. Underwhelmed – June 28, 2022

   Was looking for a quick cheap solution for a more vertical grip. This was so cheap I had to try it. The good news: it does attach to my Aero lower with the oversized trigger guard. The 15° vertical angle is exactly what I was looking for. The bad news: the fit and finish is… well… meh. It DOES FIT, but the front face doesn't overlap at all so you can see light between the grip itself and the back of the trigger guard if you look for it. There is also a place on the edge of the beavertail that looks as if it was folded over and never dealt with during the manufacturing process and magical. The rubber stopper that plugs the base of the grip is already starting to deform and pull away from the base of the plastic. The feel is also a very cheap plastic feel. You can feel a quality difference in the plastic itself from something like a magpull. If you are wondering if the side panels are rubberized material,, they are not, and the texture is weak at best. The bottom line is that it WILL WORK if you're on a super tight budget… but when your lgs sells BCM's and Magpull MOE's for $25, you'll be much happier with them for $5 more in total. I will probably replace this with one of those. If you couldn't get a grip for (close to) the same price in different angles, I would recommend this, but when you can get a much nicer grip for near as makes no difference the same price, I will recommend those instead of this.

2. 

   Krezkey – October 6, 2022

   This Strike Ind. AR-15 15 degree pistol grip is really nice, compared to the 25 degree Magpul. But mine did fit a little loose over the square lug on the lower, it actually almost fell into place with no effort, and DID have a slight wiggle after torquing it down really really tight. BUT I found a trick to getting the wiggle out ( at least on mine ). Where the beaver tail meets the lower, right under the tube ( the small radius area ) does not seat properly. After torquing it to the lower really tight and don't forget the Medium Loc Tite #242 on the bolt, Take a Bic lighter and heat up the beaver tail below the tube and pop the bottom of the grip with your palm. Keep doing that until you get it hot enough to SLIGHTLY melt it and seat it into place, by smacking the grip bottom with your palm while it's hot and pliable. That took any and ALL wiggle out of my grip, and I love it enough to give it a 5 star.. But my 4 stars still sets, because Striker should have told us, it may have needed that trick done.

3. 

   AR Pimp – March 15, 2023

   Makes shooting 556 feel like unicorns spitting out butterflies. Great ergo feel and texture. The only problem is I gotta wear a diaper now when I hold my AR because it looks so good I make a doody every time I see it!

4. 

   Atarian – April 20, 2024

   I use Magpul grips for almost all my builds, so wanted to try something different. Quality of this grip is on par with Magpul – very good. Fit to a Spike's lower is excellent. I like the ability to be able to select from different grip angles. I chose the 20 degree angle which is comfortable for me. Might try the 15 degree next. I personally like the grip texture – although this is subjective. A nice alternative to Magpul – although there's certainly nothing wrong with those.

5. 

   Mountain Man – October 1, 2024

   Felt like a cheesy toy, quality of the plastic was not what you see on Magpul for comparison.

6. 

   Mordeo – October 12, 2024

   I love SI and the gear they make. The grip feels great, is a perfect texture and has that aggressive style Strike Industries has made me love so much. Amazing and well worth the price!